 |
Plain Plug Gauges:
Range : 3 To 300 mm.
(A)Reversible Design 0.5 To 5 mm
(B)Taper Lock Design 5.0 To 50 mm
(C)D/E Disc Type 40 To 50 mm
(D)S/E Disc Type 60 To 100 mm
(C)Plate Type Design 100 To 300 mm |
 |
Plain Snap Gauges:
Range : 0.5 To 300 mm.
(A)Double Ended Built-Up Type
0.5 To 300 mm
(B)D/E Type 3 To 100 mm
(C)S/E Plate Type 6 To 60 mm
(D)C.S. Design  50 To 300 mm |
| |
 |
Comparator Stand:
(A) Model No P-101-without fine adjustment - 0 to 150 mm.
(B) Model No P.102-with fine adjustment - 0 to 150 mm. |
 |
(A) Ring Gauges:
Range : 3 To 300 mm.
Design as per IS-3485: 1972 I.S.6633:
1972 Go & No. Go Member Respectively |
| |
 |
Special Gauges :
(A)Double Ended Template (6.00 To 300 mm.)
(B)Groove Type Snap Gauges (4 To 300 mm.)
(C)Key-Way Checking Gauges (3 To 100 mm.)
(D)Gauge Blocks Range 1 mm. To 300 mm.
(E)Gauges made as per customer's drawings & Specifications. |
 |
(B) Taper Plug and Ring
As per IS-2251-1965 Morse Taper & ISO -Taper |
| |
 |
Range:0.5 mm. 25mm.
0.5 |
 |
Drilling Jig
Drilling Jigs are made as per drawing supplied by customers. We also undertake designing of Jigs. Jig bushes are made as per I.S. 66. These are honed and concentricity is maintained with 0.01 mm. |
| |
 |
DIACHECK
Precickeck offers Diacheck. This can be used to check largest Diameter of centre Drilled holes, Countersink Screws, Morse Taper, Chamfer of T grooves and for similar problems instrument is available with Mahr (GERMAN) Dial indicator for longer life. The measuring cone the body is hardned ground and honed. The instrument can be delivered with dial gauge adjusted to zero in a wooden case. |
 |
Spline/ Serration Gauges
Range : 8 mm. onwards.
Spline/Serration Gauges are made to customer's specification.
These are hardned & ground to provide longer life. |
| |
 |
Depth Gauge
Range : 0 To 100 mm.
Depth Gauges are made of high qualitys alloy steel. These are available with or without dial range is 0-100 mm. |
 |
Key Way Checking Gauge
Range : 10 To 100
Key-Way Checking Gauges is made of high quality alloy steel to check the depth of key way on shafts of dia 10 to 100 mm. These are available with or without dial indicators. |
| |
 |
Plain Snap Gauges
Range 0.5 To 360 mm.
Snap Gauges/Gap Gauges are made in sizes ranging from 0.5 mm to 360 mm. in various types of designs. >
0.5 mm 4 mm- Build-up type design.
4 mm to 160 mm- Single End Progressive type design, Double Ended design. |
|
|
|
